Vendita ANTHEM D2v 3D SINTOAMPLIFICATORE 7.1 HDMI 2.0a HDCP 2.2 DOLBY TrueHD SIGILLATO GARANZIA UFFICIALE ITALIA Ingrandisci

ANTHEM D2v 3D SINTOAV 7.1 HDMI 2.0a HDCP 2.2 DOLBY TrueHD SIGILLATO GARANZIA UFFICIALE ITALIA

Con l'acquisto di questo prodotto è possibile raccogliere fino a 918 Punti fedeltà. Il totale del tuo carrello 918 punti può essere convertito in un buono di 91,80 €.


8393

Prodotto Nuovo

DISPONIBILE

9 180,00 € tasse incl.

MPND2V3D
FinitureNero
Classe di funzionamento finaliClasse A/B
Potenza RMSoltre 100 watt
Numero Canali7.1 canali
CircuitazioneStato solido
DimensioniStandard
DacIngressi digitali e ottici

Pushing the Boundaries

The D2v 3D pushes the boundaries on what you expect from music and home theater performance. With the unparalleled flexibility you have to come to expect from Anthem processors, it provides both the versatility and adjustability you need to ale all of your digital video components work together seamlessly. The results are spectacular.

Ready for 3D

From riding the third dimension on light cycles in the movie Tron, to racing through the 3D jungles of Pandora in Avatar, the movie experience is always better in triple dimensions. 3D video has a different structure than traditional video so it must pass through the A/V processor without being affected. The new Anthem D2v circuit board automatically detects the presence of 3D video and go into passthrough mode as per a source menu option for video output configuration, passing the 3D HDMI signal from a 3D Blu-ray player to a 3D TV at resolutions up to 1080p. For additional convenience, in passthrough mode the output refresh rate is now automatically matched to the source’s frame refresh rate which is useful for sources that output a mix between 24, 50 and 60 Hz.

It’s now 3D equipped. Fully featured 7.1-channel audio and video processor, 8 HDMI Inputs and 2 Parallel HDMI outputs with the top four ports (HDMI 1 through 4) and top output (HDMI 1) supporting true bypass sensing 3D inputs automatically, Dolby TrueHD, DTS-HD Master Audio, PCM 24/192, highest quality 1080p upscaling with 1080p24 compatibility, Anthem Room Correction, premium quality A/D and D/A converters, 24-bit/192 kHz upsampling on all channels in main zone, two stereo zones.

As Good as It Gets

Sound from HDMI sources plays perfectly, at least if does if you’re using a D2v. Why? In the D2v, all eight HDMI inputs are connected through high-performance TMDS (Transition Minimized Differential Signaling) timing regenerators and multiplexers. The receiver contains a programmable equalizer and a Clock Data Recovery (CDR) function for each of the three TMDS pairs in an HDMI or DVI signal. The TMDS data outputs are regenerated and perfectly aligned to the regenerated TMDS clock signal, creating an extremely clean low-jitter DVI/HDMI signal that is easily decoded by the HDMI receiver. This is particularly useful for cleaning up a noisy/jittery source, or when a long or low-quality cable is being used.

Broadcast-Quality Digital Video Processing

  • Video Format Conversion—the latest-generation Sigma Designs VXP broadcast-quality digital image processor (supporting deep color and better-than-ever video algorithms!) converts any SD or HD video standard to other video standards.
  • Quadruple video output configuration makes it easy to switch from one configuration to another.
  • Superior image quality using per-pixel processing and motion-adaptive de-interlacing ensures optimal image sharpness and picture resolution.
  • Dynamic directional interpolation eliminates jaggy artifacts found in traditional de-interlacing algorithms.
  • Full film-mode detection for all SD and HD inputs.
  • Video transcoding allows S-Video and Component Video inputs to be digitally processed and enhanced, and then routed through the Component or HDMI outputs.
  • Each source can be adjusted independently for best picture.

Enhanced Video Performance

  • Adjustable cropping
  • Aspect ratio control
  • Chroma bug filter
  • Frame lock
  • Gamma correction
  • Adjustable noise reduction
  • Adjustable detail enhancement
  • Custom output resolution and timing via PC utility
  • All on-screen displays are shown through HDMI and Component Video
  • On-screen display shows adjustments being made (can be disabled)
  • All functions are available for HD input

State-Of-The-Art Digital Audio Procesing

  • The 24-Bit/192-kHz precision upsampler operates on all digital audio signals. The D2’s DACs also incorporate 128X oversampling to increase the sample rate to 24.576 MHz, ensuring the best phase and frequency response possible. Measurable results reflect exceptionally flat frequency response and THD+N in the upper frequencies. This is up to twenty times lower than some of the best high-end outboard DACs, resulting in a much higher level of transparency for multichannel music and movies. Sonic performance is astounding. Smoother high-frequency response, superior detail, and better image focus—a far more transparent window on the original performance.
  • Anthem’s Own Design! Two dual-core digital signal processing (DSP) engines, our own DSP design, offer a total of 800 MIPS to allow decoding of the new HD audio standards: Dolby Digital Plus, Dolby TrueHD, DTS-HD High-Resolution Audio and DTS-HD Master Audio. More than enough processing power to handle even the most complex program material with matchless precision.
  • Triple 4 Mbit 8ns external memory is large enough to ensure that the DSP engines never run out of resources.
  • 4-layer hand-designed motherboard includes separate power and groundplanes.
  • Independent 6- and 8-layer DSP, A/D and D/A converter boards—A/D and D/A use separate analog and digital planes as well as separate power and groundplanes for remarkably low noise.
  • All critical signal paths are surrounded by groundplanes.
  • Fully buffered audio/video inputs for minimum crosstalk.
  • State-of-the-art video switching circuitry is laid out on isolated, independent 2-layer glass-epoxy circuit boards.
  • Highest-precision thru-hole passive components.

An impressive resumé of superior-quality component parts

  • Audio-grade film capacitors and operational amplifiers
  • Low-ESR electrolytic capacitors
  • Audio-grade signal-coupling capacitors
  • High-value (1,000 μF) ADC reference voltage decoupling capacitors for lowest possible THD+N below 1 kHz

Super-efficient switching power supply

  • Low-noise, low-emissions design
  • Multiple-synchronized dithered-frequency isolation stages ensure exceptionally quiet audio and video operation and excellent electromagnetic compatibility
  • Fourteen independently regulated output stages ensure optimal operating environment

Unparalleled analog-to-digital and digital-to-analog conversions

Eliminates noise in the 20 to 80-kHz frequency band thanks to the high quality of our ADC and DAC designs.

Analog-to-Digital Conversion (ADC)

  • Capable of up to 24-bit x 192-kHz resolution
  • Six stereo analog attenuators—one for each channel of the 6-channel input, promote greater dynamic range and an impressive reduction in distortion

Digital-to-Analog Conversion (DAC)

  • Converters operate at their full 24-bit x 192-kHz resolution
  • Switched-capacitor output filters significantly reduce the DAC’s sensitivity to rapid fluctuations in bit rate
  • The built-in state-of-the-art upsampler allows the DACs to run at the highest speed (192 kHz) regardless of the incoming digital bitstream, and with extremely low back ground noise up to almost 100 kHz
  • High-accuracy clock generator (49.152 MHz, ±0.001%) eliminates the potential for errors in timing, thereby contributing to a significant reduction in the distortion common in D/A conversion

...And For The Audio Purist

  • Analog-Direct available on all inputs
  • Tone Bypass disables Bass/Treble adjustment
  • Balanced 2-channel XLR digital input for best digital signal
  • True-Balanced 2-channel analog input for best analog signal
  • True-Balanced analog outputs provide best noise rejection and purest signal transmission

And Then There's Anthem Room Correction (ARC)

Even when the finest speakers are perfectly positioned, the room itself still has a dramatic impact on a system’s sound, an impact more profound than that of any individual component. Various solutions have fallen in and out of favor over the years, but none has solved the problem of “the room.” Until ARC. Using proprietary processes and the power of your PC the ARC system, years in development and included with your Anthem Statement D2v, analyzes each speaker’s in-room sound and then computes the required correction to yield optimal performance from every speaker. It’s a process that takes less than five minutes! Anthem’s approach is a true audiophile solution to the problems of the room. ARC is garnering rave reviews across the industry. For more information, see the ARC data sheet in the downloads & support section.

D2v 3D Specifications

VIDEO SWITCHING
Bandwidth from input to output jack (bypass mode for component video)
Composite and S-Video70 MHz
ComponentY110 MHz
Pr90 MHz
Pb80 MHz
All analog video inputs and outputs are 75 Ω, 1.5 Vp-p.
ANALOG AUDIO
Input Impedance20 kΩ
Output ImpedanceMain-RCA300 Ω
XLR600 Ω
Zones 2/3 and Record51 Ω
Rated Input2.0 Vrms
Maximum Input5.3 Vrms
Minimum Load5 kΩ
Rated Output (100 kΩ load)2.0 Vrms
Maximum OutputRCA6.3 Vrms
XLR12.6 Vrms
Headphone Output100 mW into 32 Ω at 0.2% THD+N
Volume Control RangeMain- 95.5 dB to +31.5 dB (in 0.5 dB increments)
Zone 2/3 and Headphone- 62.5 dB to +10.0 dB (in 1.25 dB increments)
Crosstalk (at 1 kHz)82 dB between channels; 86 dB between inputs
XLR Pin ConfigurationPin 1: Ground, Pin 2: Positive, Pin 3: Negative
DIGITAL AUDIO
CrossoverHigh-Pass Slope (small speaker setting)12 dB/octave (2nd order)
Low-Pass Slope (subwoofer)24 dB/octave (4th order)
Frequency (adjustable)25 Hz to 160 Hz (in 5 Hz increments)
Tone ControlFliter TypeShelf
Range+/- 12 dB
Bass Turnover Frequency200 Hz
Treble Turnover Frequency2 kHz
Analog-to-Digital Conversion S/N Ratio (at digital Rec output) (IEC-A Filter)100 dB
All digital audio inputs and outputs comply with HDMI, S/PDIF or AES/EBU standards. Sample rate converter output is 24 bit/192 kHz regardless of input.
MAIN PATH (RCA AND XLR OUTPUTS)
Frequency Response and BandwidthAnalog Direct Inputs10 Hz to 20 kHz (+0 -0.2 dB), 1 Hz to 130 kHz (+0 -3 dB)
Analog-DSP Inputs at 24/9610 Hz to 20 kHz (+0 -0.3 dB), 2 Hz to 44.1 kHz (+0 -3 dB)
Digital Inputs at 24/9610 Hz to 20 kHz (+0 -0.2 dB), 1 Hz to 45 kHz (+0 -3 dB)
THD+N (at Rated Input and Output)Analog Direct Inputs0.006% (80 kHz BW)
Analog-DSP Inputs at 24/48 or 24/960.004% (AES17 Filter)
Digital Inputs at 24/48 or 24/960.004% (AES17 Filter)
IMD (CCIF at 15 kHz and 16 kHz)Analog Direct Inputs<0.001%
Analog-DSP Inputs at 24/480.001%
Digital Inputs at 24/48 or 24/960.001%
S/N Ratio (ref. 2.0 Vrms, IEC-A Filter)Analog Direct Inputs107 dB
Analog-DSP Inputs at 24/48 or 24/96101 dB
Digital Inputs at 24/48 or 24/96104 dB
ZONE 2 AND ZONE 3 PATHS
Frequency Response and Bandwidth20 Hz to 20 kHz (+0 -0.1 dB), 3 Hz to 140 kHz (+0 -3 dB)
THD+N (at Rated Input and Output)0.06% (80 kHz BW)
IMD (CCIF at 15 kHz and 16 kHz)0.06%
S/N Ratio (ref. 2.0 Vrms, IEC-A Filter)97 dB
FM TUNER
Sensitivity50 dB S/N13 dBµ typical, 25 dBµ max.
IHF10 dBµ typical, 20 dBµ max.
S/N RatioMono75 dB typical, 65 dB min.
Stereo69 dB typical, 60 dB min.
DistortionMono0.2% typical, 1.0% max.
Stereo0.3% typical, 1.5% max.
Stereo Separation40 dB typical, 25 dB min.
Alternate Channel Selectivity (+/- 400 kHz)70 dB typical, 60 dB min.
Frequency Response25 Hz to 15 kHz (+0 -2 dB)
AM TUNER
Sensitivity (20 dB S/N)49 dBµ typical, 56 dBµ max.
S/N Ratio50 dB typical, 43 dB min.
Distortion0.7% typical, 2.0% max.
One-Signal Selectivity (+/- 10 kHz)24 dB typical, 18 dB min.
CONTROL
Infra RedCarrier Frequency38 kHz
Maximum 12 V Supply Current150 mA
Maximum Emitter Current60 mA per output
RS-232 InterfaceConnectionDB-9F, straight-wired
Pinout (D2v side)Pin 2: Tx, Pin 3: Rx, Pin 5: Ground
Baud Rate1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200

Configuration

8 data bits, 1 stop bit, no parity bits, flow control (RTS/CTS, none)
Trigger OutputsPolaritytip positive, sleeve ground
Maximum Current at 12 VDC300 mA between all three triggers
Sequential Delay250 ms
POWER REQUIREMENT
ConsumptionMaximum 170 W
DIMENSIONS
Height5-7/8 inches (14.9 cm) including feet;
rack-mounting: 3 rack units without feet
WidthStandard version19-1/4 inches (49 cm)
Rack-Mount version19 inches (48.3 cm)
No-Handle version17-1/4 inches (43.8 cm)
Depth15-1/4 inches (38.7 cm)
Weight (unpacked)27 lb (12.3 kg)
AVAILABLE FINISH
Black

Ancora nessuna recensione da parte degli utenti.

Scrivi una recensione

ANTHEM D2v 3D SINTOAV 7.1 HDMI 2.0a HDCP 2.2 DOLBY TrueHD SIGILLATO GARANZIA UFFICIALE ITALIA

ANTHEM D2v 3D SINTOAV 7.1 HDMI 2.0a HDCP 2.2 DOLBY TrueHD SIGILLATO GARANZIA UFFICIALE ITALIA

Prodotti Correlati