Gli Ultimi arrivi
Heed Quasar MM e MC + Q-PSU preamplificatore fono mm-mc con alim. separato
- SKU prodotto: 16571
The signal processing of cartridges is one of the most delicate jobs in amplification. All the more so because it isn’t done merely by boosting a few hundred microvolts to a few hundred millivolts. In fact, at this thousandfold amplification (60 dB) the signal must be processed as cleanly and noise-free as possible. The extremely low signal level and the frequency-dependent amplification which arises from the RIAA equalisation curve applied in the cutting of LPs make the highest demands of the circuit topology and technical realisation of a phono preamplifier.
Our award-winning QUASAR phono stage, with its discrete conception and wide range of features, meets the requirements of even top-class turntable/cartridge combinations without being “unreasonable” in the usual high-end fashion.
MORE
The QUASAR is built in dual-mono configuration from the power supply upwards. There are two separate amplifier stages for MM and MC cartridges, both being fed from their own regulated power supply arrangement. Optimum adjustments to the MC cartridge in use can be applied for sensitivity and load by various settings of the jumpers on the PCB. The two separate outputs with different output levels make it possible to fine match for preamps or recorders.
The output stage has huge headroom at extremely low noise levels and, due to its low output impedance and high current delivery, can drive long interconnect cables without any sonic degradation.
The enhanced power supply of the QUASAR, the Q-PSU that also can be used as power supply upgrade with other components, is based around a 50 VA toroidal transformer with low-density magnetic field and very little dispersion. This power, together with a fine voltage regulation system, can feed the circuit with the kind of super-clean current usually delivered only by battery-based supplies, even with extreme dynamic swings.
FEATURES
– separated MM and MC input stages
– adjustable MC gain and impedance
– discrete bipolar transistor architecture
– separated power supply (see Q-PSU)
SPECIFICATIONS
Inputs: 1x MM / 1x MC
Outputs: 1x 0dBm (High Out)/ 1x -10 dBm (Low Out)
Frequency response: 3 Hz – 150kHz
Input sensitivity (MC): 100 / 330 / 600 µV
Input impedance (MC): 100 / 470 / 1000 Ω
Input sensitivity (MM): 2.5 mV
Input impedance (MM): 47 kΩ
Gain: 50 dB (MM) / 62 – 78 dB (MC)
RIAA accuracy: +/- 0.5 dB (20 Hz – 20 kHz)
Power supply options: Q-PSU (standard) / Obelisk PX / Thesis Pi
Dimensions (W x H x D): 9.5 x 7.5 x 22 cm
The signal processing of cartridges is one of the most delicate jobs in amplification. All the more so because it isn’t done merely by boosting a few hundred microvolts to a few hundred millivolts. In fact, at this thousandfold amplification (60 dB) the signal must be processed as cleanly and noise-free as possible. The extremely low signal level and the frequency-dependent amplification which arises from the RIAA equalisation curve applied in the cutting of LPs make the highest demands of the circuit topology and technical realisation of a phono preamplifier.
Our award-winning QUASAR phono stage, with its discrete conception and wide range of features, meets the requirements of even top-class turntable/cartridge combinations without being “unreasonable” in the usual high-end fashion.
MORE
The QUASAR is built in dual-mono configuration from the power supply upwards. There are two separate amplifier stages for MM and MC cartridges, both being fed from their own regulated power supply arrangement. Optimum adjustments to the MC cartridge in use can be applied for sensitivity and load by various settings of the jumpers on the PCB. The two separate outputs with different output levels make it possible to fine match for preamps or recorders.
The output stage has huge headroom at extremely low noise levels and, due to its low output impedance and high current delivery, can drive long interconnect cables without any sonic degradation.
The enhanced power supply of the QUASAR, the Q-PSU that also can be used as power supply upgrade with other components, is based around a 50 VA toroidal transformer with low-density magnetic field and very little dispersion. This power, together with a fine voltage regulation system, can feed the circuit with the kind of super-clean current usually delivered only by battery-based supplies, even with extreme dynamic swings.
FEATURES
– separated MM and MC input stages
– adjustable MC gain and impedance
– discrete bipolar transistor architecture
– separated power supply (see Q-PSU)
SPECIFICATIONS
Inputs: 1x MM / 1x MC
Outputs: 1x 0dBm (High Out)/ 1x -10 dBm (Low Out)
Frequency response: 3 Hz – 150kHz
Input sensitivity (MC): 100 / 330 / 600 µV
Input impedance (MC): 100 / 470 / 1000 Ω
Input sensitivity (MM): 2.5 mV
Input impedance (MM): 47 kΩ
Gain: 50 dB (MM) / 62 – 78 dB (MC)
RIAA accuracy: +/- 0.5 dB (20 Hz – 20 kHz)
Power supply options: Q-PSU (standard) / Obelisk PX / Thesis Pi
Dimensions (W x H x D): 9.5 x 7.5 x 22 cm
Data la situazione di emergenza, la disponibilità dei prodotti verrà valutata solo nel momento dell'avvenuto accredito, quindi è possibile che alcuni prodotti presenti sul Sito all'atto dell'ordine non siano più disponibili. Nel caso in cui il prodotto ordinato non sia disponibile, il Venditore si impegna a contattare il Cliente via e-mail per informare dei tempi necessari per la consegna del prodotto ordinato o per comunicare che, data la non disponibilità, verrà rimborsato al Cliente l'importo corrispettivo. Le disponibilità indicate sul sito sono indicative e non rappresentano in nessun caso un obbligo contrattuale.
• Quanto costa il trasporto?
Spedizioni in Italia
La spedizione è sempre gratis per acquisti superiori a 50,00 euro.
La promozione non è applicabile per le spedizioni in CONTRASSEGNO.
Per alcuni prodotti è opzionale l'aggiunta dell'assicurazione (per prodotti molto voluminosi e costosi).
Spedizioni estere in Europa
Per le spedizioni in paesi europei bisogna contattare a mezzo mail il nostro responsabile che vi indicherà in base all'oggetto scelto i costi e tempi di spedizione (approssimativi). Se si effettua l'ordine inserendo come indirizzo di spedizione una località estera europea, il nostro personale appena visionerà l'ordine invierà una mail con il costo della spedizione aggiuntivo da aggiungere al relativo ordine, il costo sarà cosi' sommato all'ordine e reinviata una mail di conferma che permetterà solo in quel momento al cliente di poter eseguire il pagamento con la modalità scelta.
• Quanto tempo occorre per la consegna?
L'ordine sarà evaso entro uno/due giorni lavorativi (ove il prodotto sia disponibile) a partire dal giorno in cui l'ordine verrà perfezionato.
L'ordine è considerato "perfezionato" nel momento in cui:
- conferma di ricezione del pagamento attraverso le varie modalità possibili (mail :info@audioevolution.it)
• Come faccio a rendere la merce difettosa?
Basta mettersi in contatto con noi spedendo una e-mail all'indirizzo: info@audioevolution.it
• Spedizioni assicurate
Per assicurare le vostre spedizioni, vi chiediamo cortesemente di contattarci per conoscere i costi precisi, consigliamo vivamente di assicurare la vostra spedizione.
