Vendita TRICHORD DIABLO PREAMPLIFICATORE PHONO MM/MC Ingrandisci

TRICHORD DIABLO PREAMPLIFICATORE PHONO MM/MC ALIMENTAZIONE PSU

Con l'acquisto di questo prodotto è possibile raccogliere fino a 127 Punti fedeltà. Il totale del tuo carrello 127 punti può essere convertito in un buono di 12,70 €.


5185

Prodotto Nuovo

DISPONIBILE

1 270,00 € tasse incl.

Diablo Phono Stage

 

SOLO TRICHORD DIABLO SENZA ALIMENTATORE

Top quality vinyl reproduction from this top of the range product

 

 

Diablo-with-NCPSU-backlit-400

The Diablo is a high performance, audiophile grade phono amplifier, designed for ultimate transparency and realism. It will maximise the performance of a wide range of phono cartridges from ultra-low output Moving Coils to high output Moving Magnets.

As with the Dino, the Diablo will accept a wide variety of MM and MC cartridges with adjustments for amplifier gain and cartridge loading on the underside of the unit.

Four high speed low noise voltage regulators effectively turn this into a dual mono design in one box.

The prime power supply for this unit is the ‘Never Connected’ PSU. It is however available with in in-line toroidal supply as a starting option.

The Diablo is user adjustable with a set of four DIP switches on the underside of the unit. These switches allow for adjustment of cartridge loading and gain setting.

The circuit is signal non-inverting and constructed using high performance, audio grade bipolar and JFET operational amplifiers from Analog Devices and Linear Technology. Metal oxide resistors and ultra low impedance capacitors throughout for lowest possible noise.

The RIAA equalisation network is part passive and part active. The capacitors and resistors used in this stage are very close tolerance audiophile types.

Four ‘state of the art’ ultra low impedance, low noise wide-band voltage regulator circuits are employed to power both channels and are largely responsible for the high sonic performance of the Diablo.

The non-ferrous cabinetry is made of aluminium, a design that reduces eddy current propagation that can affect sound reproduction in subtle but deleterious ways.

Two versions of power supply are available for the Diablo, the basic toroidal transformer power supply and the fully blown ‘Never Connected’ PSU.

 

 

Diablo Technical Info

 

Specifications for Diablo phono stage

Stereo phono amplifier for Moving coil and Moving magnet cartridges. Part active, part passive RIAA equalisation.

Switch selectable cartridge resistance loading (DIP 1 and 2)

33 ohms For Moving Coil cartridges
100 ohms For Moving Coil cartridges
1000 ohms For Moving Coil cartridges
47,000 ohms For Moving Magnet and some Moving Coil cartridges

Switch selectable capacitance loading (DIP 1 and 2)

100pF For Moving Magnet and Moving Coil cartridges
1000pF For Moving Coil cartridges

Please refer to your cartridge specification for correct loading settings.

 

 

 

 

 

 

 

 

 


Switch selectable gain (DIP 3 and 4)

Cartridge Type Sensitivity
   
MC Very Low: 100uV to 250uV (74dB)
MC Low: 250 to 400uV (70dB)
MC Normal: 400uV to 1mV (63dB)
MC High/MM Low: 1 to 3mV (52dB)
MM High: 3 to 5mV (48dB)

RIAA reproduction characteristics

20Hz to 20,000Hz      +/-0.25dB

Output voltage: 0.5V at 1KHz


Power supply requirements

The Diablo can be powered from either an AC or a DC power supply.

AC requirements: two independent supplies of:         0v / 18v ac,        0v / 18v ac.
DC requirements: two independent supplies of:         0v /-22vdc ,      0v  / +22vdc

To avoid problems only use Trichord power supplies.


Dimensions and Weight

Overall case dimensions for Diablo:        185mm x 58mm x 112mm (D x H x W)
NCPSU
Standard AC PSU

Ancora nessuna recensione da parte degli utenti.

Scrivi una recensione

TRICHORD DIABLO PREAMPLIFICATORE PHONO MM/MC ALIMENTAZIONE PSU

TRICHORD DIABLO PREAMPLIFICATORE PHONO MM/MC ALIMENTAZIONE PSU

Prodotti Correlati